![]() ![]() If the coordinate axis parameter is added after G28, it will return to the position only in the coordinate axis direction involved. Later, it will make a round trip of about 1mm to ensure the accuracy of the home position. It should be noted that in order to quickly return to the position, the moving process will continue to accelerate, when it hits the limit switch To be precise, each axis moves to the initial position. This command will return the machine’s extruder to its origin. The above command tells the printer to move from current to X10 Y20 at speed F1800. The movement instruction is executed without changing the speed during the movement. Marlin will try to read the speed value from each line of instruction, and then accelerate or decelerate to this speed value before the movement starts, and then This function is consistent with the modification function of LCD2004, please refer to the link here: įor example, G1 F1800 X10 Y20 E2.4, G1 command can include wire extrusion. To modify the print height, you can modify the marlin firmware. At this time, measure the distance between the actual lowest point and the print head, aCERAMBnd correct the distance to the marlin firmware. ![]() Enter the command G1 F1800 Z0 in the G-code input box, click Send, and move the printer down to the lowest point.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |